CarolinaPrecisionBoatLift

Symptom: Lift Tilted
Possible Problem :

1. Arm pivot bolts worn out causing excessive play .
...Solution : Replace bolts & nuts.

2. Bolt holes in pivot arm or dock plate oversized, egg shaped.
...Solution : Replace arms or dock plates.

3. One or more arms disconnected from dock.
....Solution : Rebuild arms or dock plates.

Symptom: Tank To Frame/Brackets Loose
Possible Problem:

1. C & J clamp brackets holding tank to frame-connecting bolts worn out or
....broke.
...Solution: Replace brackets bolts.

Underwater camera inspection
has located broken lift and
isolated the item and area. These
inspections provide the owner
with the details needed to
properly solve the problem. We
can do it.

A combination of things can
cause this problem. It could be
one or all of the problems listed
below. Improper slip size, poor
dock flotation, boat to heavy,
and the lift not having a large
enough weight capacity.
We can solve this problem by
attaching the lift as a front mount.

A failed steel structure. The unit
detached from the dock and fell
away. The boat was damaged and
part of the lift sunk. Semi-annual
inspection and preventative
maintainence would have
prevented it. We can do it for you.

Lack of maintenace and
professional inspection led to
this lift sinking and sliding
underneath the dock. Now it
is in the neighbors slip and two
families are inconvenienced. We
can fix it.

Routine inspection and service of
the air hoses, connections and
shut off valves can eliminate a
slow rising or sinking lift. We can
set up a service contract.

Inspection by a Pro saves the
day! This weld has cracked and
one good storm with bouncing
wave action would send this to
the bottom. It is easy to fix now
and far cheaper. We can do it.

Over a period of time your dock
plates can look like this. Worn
holes can be a reason for lift
failure. Keep your boat on top.
Our PM will prevent these
problems. We will fix it

This jet ski trailer had two little
weld beads holding it that broke.
We installed two supporting
gussets and welded them. We
fixed the problem and saved them
the loss of the the PWC on the
road, which could have resulted
in potential injury to motorist.